Christmas Presents

CHRISTMAS PRESENTS 

3 ideas for boyfriend christmas presents

Many times find the best present for your boyfriend is so hard. Each person love diferent thing in a special way. In other hand, the christmas presents have a simbolic value of your love. For that, in this article we are going to show you diferents romantics ideas to sorprise your boyfriend.

1 IDEA:

The first idea is easier than the others, you only need:

• Clothespin (made up of wood if it's posible)
• Paper
• Pen and markers
• Glue

First at all, you write the mesage and draw it in the clothespin. After this you should glue the paper into the clothespin.

2 IDEA:

If your boyfriend loves chocolate, this idea is for him!! It's very simple and you can do in your house. You need:

• Red cardboard
• Chocolate spites (lacasitos)
• Gold aluminium paper
• Black cord
• Markers
• Sellotape

In the begining, you should cut the cardboard in squares (15x15cm).

Later, cover the tubes with the gold aluminium paper and then with the cardboard it's easier if you do with sellotape.

Finally, you can do a card with a dedicatory, like: I love you, You are the bomb or something like that.

3 IDEA:

This idea is more original than the others and it's made up of recycling materials. More or less, you will need 1 hour and a half to do it. You need:

• Red wire.
• Light bulb (doesn´t work)
• Piece of wood (square)
• Wire cutters
• Hammer and nail
• Screwdriver
• glue hot gun
• 2pins
• papper and pencil

Look this video if you want to know how can you empty a light bulb.

https://youtu.be/f4l4Jqp7FR4

When you have the light bulb empty, clean inside.

Cut a piece of 25cm wire to make the filament with a heart shape.
Fold the wire in half to create a marked fold and then unfold.
About 2.5cm from the fold grasp the two ends of the loose wires and twist them to create the halves of the heart.
Next, pull the wires down, overlapping the center of the fold (the center of the heart) all the way down. Wind the two ends together.

Then, If you want to put two or more strands with a heart in your romantic craft, repeat the previous step with a new piece of wire.
Put the filament next to the pump to see how long the filament has to be and cut the excess wire if you had helped it with the help of the pliers.
If the piece of wood that you have chosen as the basis for this craft, will be recycled, you should be able to fix the wire strands down on the top of the wood so that it will hold in that position.

If, on the other hand, the wood of your Valentine's craft is firmer, use a hammer and a nail to create a small guide hole and the other through the hole. You may need to be found with glue so it does not move.

Thanks for reading our post:)